UW HCDE 598 — Digital Fabrication Assignment 5: Subtractive Fabrication and CNC milling

Time to box all these feelings up… in a CNC milled box.

I spend all of this week in work-related travel, so with a compressed timeline, I optimized heavily for fabrication and materials.

My box would be as simple as possible — to the point where the entire box can be made using a single part fabricated six times.

Unfortunately, I relied on butt joints, that are quite unreliable, but at least they were something that could be milled and assembled quickly.

The initial sketches focused on a part that would fit multiple times

To plan for the edges I measured the FR1 to ensure the joints would work well together.

I then created the actual part — starting with a 5 centimeter square, that I later changed to 4cm (to optimize for material) because each FR1 board was 7cm * 10cm — this would allow me to do 2x parts per FR1 board.

After extruding the part for the 1.5mm that the FR1 measured, I had the main part for the box.

Before manufacturing, I verified that the part actually worked.

It did!

I exported the DXF into KiCad to create a Gerber file.

I imported the Gerber file into Bantam Tools, which looked right.

Once at the Mill, I followed the recommended instructions to prep the job — e.g. creating the FR1 sandwich and using double-sided tape. I then entered the resulting measures in Bantam Tools.

And off it went:


The outcome of the milling was pretty nice.

After some light assembly

Added more sides:

The final box resting fully assembled with all the sides holding up.

The box fit really well, but needed some careful touch to stay assembled.

Note to self: BUTT JOINTS SUCK (for this assignment).

Source files for the box:

Form + function = tech for humans. PM @Microsoft building the future of @Windows (fmr @Azure_Synapse , @MicrosoftDesign ). Nobody wins unless everybody wins.

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store